CARTON/APPLIANCE CLAMPS

[vc_row][vc_column][vc_row_inner]
[vc_column_inner width=”1/2″][vc_column_text]

OEA Kaup’s Appliance and Carton Clamps are used worldwide to transport heavy appliances and consumer electronics. The replaceable wear pads offer additional protection of the clamp. Appliance and Carton Clamps are also available in rotating versions.

[/vc_column_text]

Industries:
Functions:

  • Clamping
  • Lifting

Features & Benefits

  • Interchangeable pads: 4-piece design allows user to rotate pads to extend life; several pad options to meet specific application demands.
  • Straightforward installation: attachment is mounted on guide rail and hydraulic hose lines are connected, without the need for special tooling or excessive downtime.
  • Ease of use for operator: high visibility, end-of-stroke slowdown (Softstop) and equal distribution of clamping pressure allow operator to focus on the load, without having to worry about the attachment.

[/vc_column_inner][vc_column_inner width=”1/2″]


Call for additional pad options.
[/vc_column_inner][/vc_row_inner]
[vc_tta_tabs active_section=”1″]

[vc_tta_section title=”Carton/Appliance Clamp” tab_id=”carton-app-clamp”]

[vc_column_text]

Carton & Appliance ClampsCapacity lbLCD inS inB inG inE inF inA inITA ClassV inCofG ZCofG YWeight lb
MINIMUM2,500 lb- -- -- -- -- -- -- -II- -- -- -- -
CCB1-025-4848-2-A2,501 lb24"VBSS42.5"49.2"2.2"47.2"22-77.2II5.5"18.2"14.4"1,529 lb
CCB1-036-4848-2-B3,674 lb24"VBSS42.5”49.2"2.4"47.2"22.8-78II5.5"18.5"14.4"1,626 lb
CCB1-036-4848-3-B3,674 lb24"VBSS42.5”49.2"2"47.2"22.8-78III5.5"18.5"14.4"1,626 lb
MAXIMUM17,000 lb- -- -- -- -- -- -- -III- -- -- -- -
All dimensional sizes are nominal. Other sizes available upon request.

Attachment Installation
The guide rail for the sideshifter housing is located on the upper bar of the fork carriage and locks into the center notch. The complete attachment is mounted onto this guide rail and secured by bolting the bottom mounting brackets to the carriage. These are needle bearing guided bottom brackets (Smoothroll). Attachments with capacities above 3.5 tons feature tandem rollers. Once the hydraulic lines from the attachment to the truck are connected the attachment is ready for operation.

Independent sideshift system permits sideshifting without restriction under safety regulations and allows utilization of the entire opening range for shifting loads sideways. All sideshift housings features end-of-stroke- slow-down (Softstop).

If required, clamps can be fitted with valveblock sideshift (VBSS), which uses the residual stroke of the clamp cylinders to achieve lateral arm movement.

A replaceable wear bar comes standard and allows the tip of the attachment pads to clamp the load with suitable pressure.

Clamp Profile
A combination of T and C profiles is used on OEA Kaup Clamps, providing high stability. This extremely robust sliding profile improves gliding and reduces wear and tear.

Optional Accessories
Quick release brackets can be supplied — allowing the clamp to be mounted/dismounted quickly without any tool.

If required three different force levels can be preset and controlled, either manually or by solenoid valve. A pressure gauge mounted in sight of the driver provides a view of hydraulic operation pressure of the clamp.

(1) Independent sideshift system
(2) Smoothroll needle bearing guided bottom brackets
(3) Smoothroll tandem rollers
(4) Quick release lower brackets
(5) T and C sliding profiles
(6) Pressure gauge
(7) Manual valve
(8) Replaceable wear bar

Replacement wear pads are available in a variety of materials to meet the demands of numerous industries.

[/vc_column_text]

[/vc_tta_section]

[vc_tta_section title=”Load Backrest” tab_id=”carton-app-load-backrest”][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]

Load Backrest

[/vc_column_text][vc_column_text]The OEA Kaup Load Backrest has been designed to secure and stabilize loads.

  • Solid construction
  • Good visibility conditions
  • Suitable for fork carriages and fork positioners

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″]

[/vc_column_inner][/vc_row_inner][vc_column_text]
Other sizes available upon request

Carton/Appliance Clamp LBRB inH inITA Class
LBCCB1-425-2-A42.5"19.7"II

All dimensional sizes are nominal
[/vc_column_text][/vc_tta_section]

[/vc_tta_tabs]
[vc_row_inner][vc_column_inner width=”2/3″][vc_column_text]
[vc_video link=”https://vimeo.com/327761139″]

Looking for OEA Kaup replacement parts? Contact our product experts for specs and pricing.

[/vc_column_text][/vc_column][/vc_row]