Push-Pulls

Push/Pulls can replace traditional pallets with inexpensive slipsheets when shipping and receiving warehouse loads. Push/Pulls are typically used for bagged products like seed, agricultural products, cosmetics, cased food, and more. OEA-Kaup’s Push/Pull can be used with or without a pallet saver, with a separate sideshifter, or with a hydraulically-adjustable carrying platen. The range includes a slip-on version which can easily be fitted on forks of all sizes.

kaup_T141S_146S.jpg

Push-Pull Model T143S

kaup_TZ_T143S.jpg
Product # Capacity LCD B C D E F ITA Class V CofG (Z) Weight
PPFM-036-1548-2-A 3600 lb 24" 39.37" 51.18" 40.75" 0.39" 49.21" II 8.46" 10.83" 992.1 lb
PPCM-036-1548-2-A 3600 lb 24" 39.37" 51.18" 40.75" 0.98" 49.21" II 10.04" 14.17" 1300.7 lb

Push-pull attachments allow the transportation of loads by means of inexpensive and place saving slip-sheets which are usually made of plastic or cardboard. Expensive and unwieldy wooden pallets are then superfluous. This makes, for example, economical loading of over-seas containers feasible.

The gripper bar on the push-pull grate pulls the slip-sheets, together with the load, onto the carrying plate of the push-pull and the load is thus transported to its destination point. The load is either pushed off together with the slip-sheet, or in the case of a push-pull with slip-sheet saver, only the load is pushed off.

OEA-KAUP has modified and technically improved its previous range of push-pulls. The most important difference to the “old” range is that the new range of push-pulls is designed with a scissor system so that the pushing mechanism is self-supporting and needs no further support. A further advantage of the new push-pull lies in the hydraulic system. All hydraulic cylinders have been optimised to the required application guaranteeing safe handling of the load. Also the use of plastic sliding bushes is service friendlier and makes the bearings of the scissor system maintenance free.

Typical goods, where OEA-KAUP push-pulls are put in operation, are cartons and bagged goods as well as beverage cans and bottles.

OEA-KAUP state-of-the-art push-pulls are available in different versions

• with or without pallet saver

• with separate sideshifter

• with hydraulically adjustable carrying plate

Step 2

Grip the slip-sheet

Step 1

Approach the load until the flap fits into the gripper channel

kaup_T141S_146S_EN-(1).jpg

Step 3

Pull the slip-sheet and load onto the platen

kaup_T141S_146S_EN3.jpg
kaup_T141S_146S_EN2.jpg
kaup_T141S_146S_EN4.jpg

Step 4

Release the flap

step4.jpg

Step 6

Slip-sheet saver bar is lowered and presses down the slip-sheet

Step 5

Slip-sheet saver bar is raised

step5.jpg
step6.jpg

Step 7

Load is pushed off whilst the slip-sheet remains on the platen

step7.jpg